Homelite HG6000 - Manual (Page 2)

Page 2
FUEL
AC CIRCUIT BREAKER
DANGER
GROUNDING THE GENERATOR
To avoid the risk of shock or electrocution, generator must be properly grounded. The nut and ground terminal on the
frame must always be used to connect the generator to a suitable ground source. The ground path should be made
with #8 size wire. Connect the terminal of the ground wire between the lock washer and the nut, and tighten the nut
fully. Connect the other end of the wire securely to a suitable ground source.
The National Electric Code contains several practical ways in which to establish a good ground source. If a steel or iron
rod is used, it should be at least 5/8 in. diameter, and if a nonferrous rod is used, it should be at least 1/2 in. diameter
and be listed as material for grounding. Drive the rod or pipe to a depth of 8 ft. If a rock bottom is encountered less than
4 ft. down, bury the rod or pipe in a trench.
All electrical tools and appliances operated from this generator
must be properly grounded by use of a third wire or be “Double
Insulated.”
It is recommended to:
1. Use electrical devices with 3-prong grounded plugs.
2. Use an extension cord with a 3-pole receptacle and a
3-prong plug at opposite ends to ensure continuity of the
ground protection from the generator to the appliance.
Check and adhere to all applicable federal, state, and local
regulations relating to grounding specifications. Consult a quali-
fied electrician or service personnel if the grounding instructions
are not completely understood or if in doubt as to whether the
generator is properly grounded.
 Introduction .................................................................................................................................................................... 2
 General Safety Rules ..................................................................................................................................................... 3
 Specific Safety Rules ..................................................................................................................................................... 4
 Symbols ......................................................................................................................................................................5-7
 Electrical .....................................................................................................................................................................8-9
 Features .................................................................................................................................................................10-11
 Loose Parts List ........................................................................................................................................................... 12
 Assembly ................................................................................................................................................................13-14
 Operation ................................................................................................................................................................14-16
 Maintenance ...........................................................................................................................................................17-20
 Troubleshooting ........................................................................................................................................................... 21
 Wiring Diagram ............................................................................................................................................................ 22
 Warranty ....................................................................................................................................................................... 23
 Parts Ordering / Service .................................................................................................................................Back Page
TABLE OF CONTENTS
INTRODUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product, making it easy to maintain and operate.