Henny Penny SMART COMBI FM05-061-A - Manual (Page 34)

4.3 Filling and emptying the unit (tabletop
unit)
4.3.1 Filling and emptying the unit (with loading trolley)
Requirements Suspension frame is removed
Check that food racks are correctly positioned in the suspension frames
NOTICE
This section describes the process of filling/emptying with a loading
trolley (optional accessory).
CAUTION
Risk of burns due to hot liquids
→ Only use the correct racks: The racks must lie safely on the
supporting brackets.
→ Always push the racks into the U-shaped runners.
→ Do not push in containers with liquids to be cooked above eye-level.
1
3
2
Figure 6: Filling/emptying with loading trolley
1. Open the chamber door.
2. Mount the push-in frame on the bolts.
3. Rotate the lever (2).
The rack frame is secured against rolling off.
Global Foodservice Solutions
Operating manual 34
SmartCombi ™
Operation