HP XW3400 - Manual (Page 104)

4 . Plug in the workstation and turn on power to the workstation.
5 . Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to Section 2.2.
Type 3 Battery Holder
1 . Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2 . Insert the new battery and position the clip back in place.
3 . Replace the workstation access panel ( Access panel on page 61 ).
4 . Plug in the workstation and turn on power to the workstation.
5 . Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to Section 2.2.
94 Chapter 7 Removal and replacement procedures ENWW