Honeywell DOLPHIN 9700 - Manual (Page 73)

8 - 1
8
Communication
Connections Menu
The Connections system setting provides access to the terminal’s various wireless communication
options.
Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
Icon Tapping this icon…
Beam Enables infrared communication. See Receiving Data on page 8-3 .
Connections Opens Microsoft’s connections manager. See Connections Manager on page 8-4 .
Dolphin
Wireless
Manager Manages the wireless radios installed in the terminal. See Dolphin Wireless Manager
on page 8-5 .
USB to PC Enables advanced wired USB to PC communication via ActiveSync. See
ActiveSync Communication on page 8-8 .
Wi-Fi Enables you to configure Wireless Zero Config (WZC).
This icon appears only if the 802.11a/b/g driver is loaded on the terminal and the
Honeywell WLAN Security Supplicant is not loaded.
By default, the Wireless Zero Config is disabled and the supplicant is loaded. This
icon appears only if you removed the supplicant and cold booted the terminal.