Dolphin wireless manager window, Enabling the radios – Honeywell DOLPHIN 9700 User Manual
Page 78
Advertising
8 - 6
Dolphin Wireless Manager Window
Tap Start > Settings > Connections > Dolphin Wireless Manager
.
Enabling the Radios
1.
Tap Start > Settings > Connections tab > Dolphin Wireless Manager.
2.
Tap anywhere inside the rectangle or the OFF button inside the rectangle.
3.
The radio begins activating.
4.
When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON.
Note: If applicable, information about the radio appears in the rectangle.
If a rectangle is grayed-out,
then the radio is not installed
on the terminal.
If applicable, information about
the radio appears when the
radio is activated.
These buttons show you the
state of the radio.
Advertising