HONDA MK SG-2 - Manual (Page 16)

MK SG-2 Revision 11/01, Effective Date November 13, 2001 Page 16
UNPACKING, TRANSPORT and ASSEMBLY
5. Vacuum Setup for Operation:
The SG-2 Scarifier is designed for use with a vacuum. MK Diamond recommends using the SG-2 with a
vacuum to reduce the amount of dust generated during operation.
MK Diamond does not endorse any specific vacuum type, but does recommend the customer use the SG-2
with a dry dust collector (designed for wood dust) as opposed to a standard wet/dry vacuum.
(C)
Using a 2 1/2-inch hose,
connect the Vacuum to the SG-2
at the Vacuum Connection Point
(B)
Remove the Cap from the
Vacuum Connection Point
(D)
Verify the hose connections are
secure at the SG-2 and the
Vacuum
(A)
Obtain a vacuum of the type
specified above
Cap
Dry Dust
Collector Vacuum
Connection Point
2 1/2-inch
Hose
Vacuum
Connection
Point
Press
On
Verify
Connections