HP mp3320 - Manual (Page 74)

74 User’s Guide
Reference
International
For regulatory identification purposes, your product is assigned a regulatory model
number. The regulatory model number for your product is listed in the declaration of
conformity. This regulatory number is different from the marketing name and product
number.
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: Hewlett Packard Company
Manufacturer's Address: Display Technologies & Products
1000 NE Circle Blvd.
Corvallis, OR 97330-4239
Declares, that the product(s):
Product Name:
Digital Projector
Model Number(s): mp3320, mp3322 series
Regulatory Model: CRVSB-04VU
Conforms to the following product specifications:
Safety: IEC 60950-1:2001/ EN 60950-1:2001 +A11:2004
IEC 60825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 LED
GB4943-1995
EMC: AS/NZS CISPR22: 2002
EN55022: 1998+ A1: 2000+ A2: 2003 Class B
EN55024: 1998+ A1: 2001+ A2: 2003
EN61000-3-2: 2000
EN61000-3-3: 1995+ A1: 2001
FCC - 47 CFR Part 15, subpart B, Class B
ANSI C63.4 – 2003
ICES – 003: 2004
GB9254 – 1998, GB17625.1 - 2003
Supplementary information:
The product herewith complies with the requirements of following Directives and carries the CE marking
accordingly:
-Low Voltage Directive: 73/23/EEC
-EMC Directive: 89/336/EEC
[1] The product was tested in a typical configuration with Hewlett Packard Personal Computer peripherals.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Corvallis, Oregon, December 7, 2005
Steve Brown, General Manager
European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Straße 140, 71034
Boeblingen, Germany. (FAX:+49-7031-143143).
USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA
94304. Phone: (650) 857-1501.