HP 2600 - Manual (Page 18)

Getting Started
Introduction
Introduction
This Management and Configuration Guide is intended to support the
following switches:
■ HP ProCurve Series 2600
■ HP ProCurve Series 2600-PWR
■ HP ProCurve Series 2800
■ HP ProCurve Series 4100gl
■ HP ProCurve Switch 6108
This guide describes how to use the command line interface (CLI), Menu
interface, and web browser interface to configure, manage, and monitor
switch operation. A troubleshooting chapter is also included.
For information on other product documentation for the above switches, refer
to “Related Publications” on page 1-4.
The Product Documentation CD-ROM shipped with the switch includes a
copy of this guide. You can also download a copy from the HP ProCurve
website,
http://www.hp.com/go/hpprocurve. (See “Getting Documentation From
the Web” on page 1-6.)
About the Feature Descriptions
In cases where a software feature is not available in all of the switch products
covered by this guide, the text specifically indicates which device(s) offer the
feature.
1-2