Installing the hardware, E 16, Unplug the computer – HP DVD100I User Manual
Page 37: E 17, A free drive bay
hp dvd-writer
hp dvd-writer
hp dvd-writer
hp dvd-writer
dvd100i
dvd100i
dvd100i
dvd100i
Technical Support Solutions Guide 10/25/01
Installing the hp dvd-writer dvd100i Drive
37
37
37
37
Installing the Hardware
1.
1.1.
1.
When the
Shutdown for Hardware Installation
Shutdown for Hardware Installation
Shutdown for Hardware Installation
Shutdown for Hardware Installation
screen appears, click
Shutdown
Shutdown
Shutdown
Shutdown
to shut down Windows.
2.
2.
2.
2.
Turn OFF your computer, monitor, and other devices.
3.
3.
3.
3.
Unplug the power cords from the wall outlet or from the power strip, if you use
one.
Figure 16
Figure 16
Figure 16
Figure 16
Unplug the Computer
4.
4.
4.
4.
Remove the cover from your computer.
5.
5.
5.
5.
Locate a free, half-height drive bay in the computer and remove its cover plate.
Half-height drive bays are about 6” wide and 1.75” tall (15 cm x 4.5 cm).
6.
6.
6.
6.
If you will be replacing an existing CD-ROM drive, remove that drive.
Lay aside any cables that you unplug from the CD-ROM; you will later plug them
into the hp dvd-writer drive.
Figure 17
Figure 17
Figure 17
Figure 17
A Free Drive Bay
7.
7.
7.
7.
Keep any mounting hardware, as it may be needed later for securing the drive in
the drive bay.
!
CAUTION: Touch something metallic (an unpainted part of the
computer’s case or a file cabinet) to discharge static electricity before
touching anything inside your computer.
■
Static electricity can damage your computer’s internal parts.