Hitachi P50V701 - Manual (Page 47)

O
n
-S
c
re
e
n
D
is
p
la
y
2. Vertical Position setting returns to "0" automatically after TV power Off/On.
Video
Aspect
Use this function to select the Picture Format Aspect
Ratio.
Auto Aspect
Automatically adjust the Aspect Ratio depending on
the input signal to fill the screen.
Mode
M anually select the Aspect Ratio.
Vertical Position
This function allows you to select when aspect style is
either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be changed with these modes.
For example, it will be useful for centering the picture area at both the top and bottom of the picture with 480i/
/480p signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video is toward top of
screen).
1. Use the CURSOR PAD
̆
or
̄
to to select menu item.
2. Press the CURSOR PAD ̇ or ̈ to adjust the function.
3. Press the EXIT to quit the MENU, or select ASPECT to return to the main menu.
NOTE: 1. Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Auto Aspect : On
Mode 16:9 Standard1
Vertical Position : 0
Aspect
Video
Move SEL Return
OR
2. This setting return to Off automatically after TV power Off/On.
Black Side Panel On
Next/Prev On/Off SEL Return
NOTE: 1. To prevent screen damage when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is
recommended to watch 4:3 signal with gray side bar.
2. Press EXIT to quit menu or select SET BLACK SIDE
PANEL to return to the previous menu.
47
Black Side Panel
The BLACK SIDE PANEL function turns the gray side
bars from gray to black when watching 4:3 signals
in Standard mode.
1. Press the CURSOR PAD ̇ or ̈ to set to ON or OFF.
Black Side Panel Off
Next/Prev On/Off SEL Return