HP VA-1809 - Manual (Page 35)

8.8 ISRC1 Packet
TOP → ANALYSIS [ANALYZE] → DETAILS[F1] → more[SHIFT] →
ISRC1 Packet[F3]
----------------------------------ISRC1 Packet 表示画面-----------------------------------------------
This operation sequence is used to decode ISRC1 Packet of the input and display it.
For further details of the display, refer to the HDMI and DVD audio specifications.
8.9 ISRC2 Packet
TOP → ANALYSIS [ANALYZE] → DETAILS[F1] → more[SHIFT] →
ISRC2 Packet[F4]
----------------------------------ISRC2 Packet 表示画面-----------------------------------------------
This operation sequence is used to decode ISRC2 [ACP ??? ] Packet of the input and
display it.
Refer to the HDMI specifications.
8.10 Channel Status
TOP → ANALYSIS [ANALYZE] → DETAILS[F1] → more[SHIFT] →
more[SHIFT]→ Channel Status[F1]
----------------------------------Channel Status 表示画面-----------------------------------------------
This operation sequence is used to decode the Channel Status Bit of the input HDMI
audio stream and display it.
Refer to the IEC60958 specifications.
8.11 Audio Timing
TOP → ANALYSIS [ANALYZE] → DETAILS[F1] → more[SHIFT] →
more[SHIFT]→ Audio Timing[F2]
----------------------------------Audio TIming 表示画面-----------------------------------------------
This operation sequence is used to display the constants (N, CTS) used to regenerate the
Audio Clock of the input HDMI Audio and the volume level of the input HDMI Audio.
For details on the audio clock regeneration, refer to the HDMI specifications.
* The volume level can be displayed only when PCM sound is input.
32