HP VA-1809 - Manual (Page 8)

15
Rotary encoder
When this is rotated while the MENU key is ON, menus or programs can
be selected.
16
LOCK switch 1
This is the operation lock switch. When it is set to ON, none of the
panel keys can be operated.
17
LOCK switch 2
This is the picture ON switch. It enables the rear panel images to be set
to ON or OFF.
CAUTION
Always remember to handle the CF cards with great care. When inserting or
ejecting a card, follow the instructions in section 3.2.3 "How to insert the CF
cards" or section 3.2.4 "How to eject the CF cards."
Failing to take the steps in the prescribed sequence may cause the CF card
data to be destroyed. In such a case, the CF card will no longer be
recognized even when it is re-inserted.
2.3.2 VA-1809 rear panel
I/O
POWER AC IN(100-240V) T5A
RS-232C
HDMI IN
LAN
EXT MONITOR(VGA)
COAX OUT HDMI OUT
MODEL ;
SER.No ;
MADE IN JAPAN
(1) AC input socket: Connect the power cable here. This socket supports
100-120V and 200-240V supply voltages.
CAUTION
Be absolutely sure to use this switch to turn the power on and off. Turning the
power on or off by connecting or disconnecting the power cable may destroy the PC
card.
(2) Frame ground (FG) terminal: This is connected to the corresponding FG
terminal on the unit connected to the VA-1809.
(3) <3> HDMI IN connector: The HDMI output signals of the DVD player,
set-top box, etc. are supplied to this connector.
(4) HDMI OUT connector: The HDMI signals are output from this connector to
the input connector on the HDMI TV set, monitor, etc.
(5) COAX (coaxial) OUT connector: This is the digital audio output connector.
5