HONDA K Series - Manual (Page 17)

17
- Front Camber Setting = -0.5 to -1 Degree (Less for street driving, more for
racing)
Check List:
For your safety, please check…
- That every suspension component
is fastened tightly.
- That the steering system is
fastened properly and all nuts and
bolts are secure.
- For a firm brake pedal.
- That the engine is stationary.
- All fluid levels are full.
- Tires are inflated properly.
- All lug nuts are tight.
Test Drive:
For your first test drive, go slow and easy to make sure that there are no problems.
Listen to the car as you drive it for odd noises. Drive the car easily for a few miles
and then go over the Check List again. After driving the car for 100 miles, check
front suspension alignment.
After that, have fun!
Disclaimer of Warranty
Neither the seller nor the manufacturer will be liable for any loss, damage or injury directly or indirectly arising
from the use or inability to determine the use of these products. Before using, the user shall determine the
suitability of the products for its intended use, and the user should assume full responsibility and risk in
connection herewith.
This product is intended for off road use only.
Copyright 2006 Mini Tec, L.L.C. All rights reserved.