HONDA K Series - Manual (Page 8)

Subframe assembly
*Supplied with kit
Step 1: Attach upper bump stops. Mini bump stops with the single stud will work
here.
Step 2: Attach the subframe to the car using the two large subframe mounting bolts
just like the standard Mini subframe. If your car is an earlier model and does not have
these two large ¾” diameter bolts, then you will need Mini Tec’s MK1/2 Subframe
Mounting Kit (#351000). Standard Mini mounting bolts are circled in red in the
following photo. Do not tighten completely at this point. You will need to attach the
subframe and the bottom first.
8