Primary master submenu of the main menu – Fujitsu Siemens Computers LifeBook C2110 User Manual

Page 6

Advertising
background image

6

L i f e B o o k C S e r i e s B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA
devices are installed.

*Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.

Figure 2. Primary Master Submenu

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Type:

n

Auto

n

None

n

CD-ROM

n

Hard Disk

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all of the
following Set-up items do not appear. Select CD-ROM if a CD-ROM drive
is installed at this connection. If Hard Disk is selected, you must specify the
number of Cylinders, Heads, and Sectors for the drive.

CHS Format (Cylinders, Heads, Sectors)

Cylinders:

n

A number
between

0 and 65,535

–—

This appears only when Hard Disk is selected. When Hard Disk is selected,
you can change the value. This field is incremented by pressing the
[Spacebar]) or by pressing [Shift] [+]. This field is decremented by pressing
the [-] key. You can also change the field by typing in the number.

Heads:

n

A number

between

1 and 16

–—

This appears only when Hard Disk is selected. When Hard Disk is selected,
you can change the value. This field is incremented by pressing the
[Spacebar]) or by pressing [Shift] [+]. This field is decremented by pressing
the [-] key. The field can also be changed by typing in the number.

PhoenixBIOS Setup Utility

F1

Help

ESC

Exit

Select Item

Select Menu

-/Space

Enter

F9

Setup Defaults

F10

Save and Exit

Change Values

Select Sub-Menu

Main

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Primary Master [TOSHIBA MK2018GAP -(PM)]

Type:

[

Auto

]

LBA Format

Total Sectors:

39070080

Maximum Capacity:

20004MB

Multi-Sector Transfers:

[16 Sectors]

LBA Mode Control:

[Enabled]

PIO Transfer Mode:

[Multiword DMA 2]

DMA Transfer Mode:

[Disabled]

EarthlingBIOS.fm Page 6 Thursday, April 11, 2002 9:48 AM

Advertising