Freedom9 USB - Manual (Page 17)

14
7. The next screen (Figure 25) shows the size of the partitions that will be created. The
column on the left shows the space used, total space, and file system of the partitions on the
local drive. The second column shows the size of the partition that will be created to start
full backups, which is the same size as the local partition. Click “Next” to proceed.
Figure 25: Set Partition Sizes
8. The next screen (Figure 26) shows a summary of the actions to be performed. Click “Start”
to start the partitioning process, then “Yes” in the warning window (Figure 27) to confirm.
Figure 26: Partition Summary