FUJITSU fi-4750C - Manual (Page 84)

7-15
19. Select Light Source in Unicolor Reading
<Screen 59>
1 Press “Next” or “Previous” and let the
scanner display Screen 59.
2 At Screen 59, press or to select a light
source. Press if you want to activate
the setting.
NOTICES
1. The specification from the host computer has priority.
2. The default is G (Green).
3 Press to return.
20. High Quality Mode setting
<Screen 60>
1 Press “Next” or “Previous” and let the
scanner display Screen 60.
2 At Screen 60, press or to select “On”
or “Off”. Press if you want to activate
the setting.
NOTICE
The reading speed reduces to half when “On” is selected.
3 Press to return.