Fisher PLC-XU87 - Manual (Page 26)

26
Basic Operation
If a projected picture still has keystone distortion after
pressing the AUTO SET UP button on the top control or the
AUTO SET button on the remote control, correct the image
manually as follows:
Press the KEYSTONE button on the remote control. The
Keystone dialog box appears. Use the Point
ed buttons to
correct keystone distortion. The keystone adjustment can
be stored (see page 46).
Reduce the upper width
with the Point
e button.
Reduce the lower width
with the Point
d button.
• The white arrows indicate that there is no
correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Remote Control
Top Control
AUTO SET UP button
O N
- OFF
POWER
AUT
O SET
UP
INPUT
WARNING LAMP REPLACE
MENU
- VOLUME
+ VOLUME
SELECT
POINT ed buttons
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER, VIDEO, or NETWORK button on the
remote control to select the input source. See pages 28-29,
38-39 for details.
Refer to the owner’s manual “Network Set-up and
Operation” for details about the network input.
COMPUTER/VIDEO/NETWORK button
Remote Control