FUJITSU ETERNUS DX P3AM-3842-05ENZ0 User Manual
Page 24
Chapter 7
Installing Drivers and Setting Up the Server
Install the Fibre Channel Card driver, and then set up the server environment.
Refer to "ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux Driver
Settings for Non-Fujitsu Fibre Channel Cards" for detailed setting procedures.
•
When Emulex Fibre Channel cards or Fujitsu Emulex Fibre Channel cards are used, refer to the "Operations
When Using Emulex Fibre Channel Cards" chapter.
•
When QLogic Fibre Channel cards or Fujitsu QLogic Fibre Channel cards are used, refer to the "Operations
When Using QLogic Fibre Channel Cards" chapter.
•
When Brocade Fibre Channel cards are used, refer to the "Operations When Using Brocade Fibre Channel
Cards" chapter.
24
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
Copyright 2013 FUJITSU LIMITED
P3AM-3842-12ENZ0