Fortinet 5003 - Manual (Page 93)

FortiSwitch-5003A CLI reference config
FortiSwitch-5003A and 5003 Fabric and Base Backplane Communications Guide
01-30000-85717-20081205
93
route static
Use this command to add, edit, or delete static routes for the mgmt interface.
Syntax
config route static
edit <sequence_number>
set device <interface_name>
set dst <destination-address_ipv4mask>
set gateway <gateway-address_ipv4>
end
Example
This example shows how to add a default route for the mgmt interface that points to 192.168.22.44.
config route static
edit 2
set device mgmt
set dst 0.0.0.0 0.0.0.0
set gateway 192.168.22.44
end
Related topics
• config system interface
• execute traceroute
Variables Description Default
edit <sequence_number> Enter a sequence number to identify the static route. No default.
device <interface_name> The device name is always mgmt because you cannot
configure routing for other FortiSwitch-5003A interfaces.
mgmt
dst <destination-
address_ipv4mask> Enter the destination IP address and network mask for this
route.
You can enter 0.0.0.0 0.0.0.0 to create a default route.
0.0.0.0
0.0.0.0
gateway <gateway-
address_ipv4> Enter the IP address of the next-hop router to which traffic is
forwarded by this route.
0.0.0.0