Configuring the fortigate unit as a l2tp gateway, Adding users and user groups, Enabling l2tp and specifying an address range – Fortinet FortiGate 100 User Manual
Page 214
214
Fortinet Inc.
Configuring the FortiGate unit as a L2TP gateway
PPTP and L2TP VPN
Figure 31: L2TP VPN between a Windows client and the FortiGate unit
Configuring the FortiGate unit as a L2TP gateway
Use the following procedures to configure the FortiGate unit as an L2TP gateway:
Adding users and user groups
To add a user for each L2TP client:
1
Go to User > Local.
2
Add and configure L2TP users.
See
“Adding user names and configuring authentication” on page 174
3
Go to User > User Group.
4
Add and configure L2TP user groups.
See
“Configuring user groups” on page 179
Enabling L2TP and specifying an address range
1
Go to VPN > L2TP > L2TP Range.
2
Select Enable L2TP.
3
Enter the Starting IP and the Ending IP for the L2TP address range.
4
Select the User Group that you added in
“Adding users and user groups” on
5
Select Apply to enable L2TP through the FortiGate unit.