Freedom9 IP 800 - Manual (Page 42)

freeView IP 800 User’s Manual
40
Figure 5-9: Remote Console Options Menu – Local Cursor
Video Settings
This option opens a panel for changing the video settings for the freeView IP 800. The unit
features two different dialogs, which influence the video settings:
Video Settings Through The Web Interface
This option enables the local video port. This option determines whether or not the video output
from the host is transmitted to the local monitor.
The Noise Filter option defines how the freeView IP 800 reacts to small changes in the video
input signal. A large filter setting uses less network traffic and leads to a faster video display, but
small changes in the display may not be recognized and updated on the remote immediately. A
small filter setting displays all changes on the remote host instantly but will produce more
network traffic (depending on the quality of the video input signal). The default setting should be
suitable for most situations.