Warning, Caution, Battery charging – FORD F-150 C3493 User Manual

Page 9: Assembly

Advertising
background image

9

C3493pr-0922

In the unassembled state, this package contains

small parts. Adult assembly is required.

BATTERY CHARGING

Battery

Connector

Charger

Connector

A

B

• Plug the battery connector into the charger connector

A

.

Push firmly to make sure the connectors are completely joined.

• Plug the charger into a standard wall outlet

B

.

Notes:

- Use the charger only in a wall outlet. Do not plug into

a ceiling outlet.

- If power flow to the wall outlet is controlled by a switch,

make sure the switch is “ON”.

- The power indicator on the charger does not indicate the

charge status of your battery. The power indicator allows you

to see there is power from the wall outlet.

• Before first-time use, charge the battery for at least 18 hours.

Never charge the battery longer than 30 hours.

• Recharge the battery for at least 14 hours after each use of your

vehicle. Do not charge the battery longer than 30 hours.

• Once the battery is charged, disconnect the battery connector

from the charger connector. Unplug the charger from the wall

outlet. The battery is now ready to be installed in your vehicle.

Please see the Battery Installation section on page 19 for detailed

instructions on installing your battery. If your battery is already

installed in your vehicle, simply re-connect the motor harness

connector to the battery connector.

WARNING

Children can be harmed by small parts,

sharp edges and sharp points in the

vehicle's unassembled state, or by electrical

items. Care should be taken in unpacking

and assembly of the vehicle. Children should

not handle parts, including the battery,

or help in assembly of the vehicle.

ASSEMBLY

• Fit a

3

/

8

" -16 hex nut onto one end of the rear axle. Hand tighten

the hex nut to hold in place.

Rear Axle

1

INCORRECT

GAP

CORRECT

NO GAP

Power

Indicator

3

/

8

" -16 Hex Nut

2

• Slide a hubcap,

peg side up, onto the rear axle.

• Slide a wheel,

ribs up, onto the rear axle.

• Slide a rear wheel driver,

ring side down, onto the rear axle.

Rear Wheel Driver

(Ring Side Down)

Wheel

(Ribs Up)

Hubcap

(Peg Side Up)

Rear Axle

CAUTION

Advertising