Fisher-Price 79596 - Manual (Page 3)

2
SHOWN ACTUAL SIZE
Assembly
1
3
Lower Leg
• Fit a foot onto the end of the lower leg.
• Insert a #8
1 /
2
" pointed screw through the bottom of the
foot and into the lower leg. Tighten the screw with a
Phillips screwdriver. Do not over-tighten.
• Repeat assembly steps 1 and 2 to assemble the other
elbow foot and foot to the other lower leg.
• Position one of the lower legs so that the long portion
is down.
• Fit an elbow foot, with the cup side down, onto the bend
in the lower leg.
• Insert a #8 3 /
4
" pointed screw through the bottom of the
elbow foot and into the lower leg. Tighten the screw with
a Phillips screwdriver. Do not over-tighten.
• Stand each lower leg upright, as illustrated.
• The elbow foot and foot should be flat against the floor.
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.
Foot
Cup
Side
Down
• Position an upper leg so that the red dot is upward.
• While pressing the button on the straight end of an
upper leg, insert the upper leg into a lower leg. Make
sure the button on the upper leg “snaps” into the hole
in the lower leg.
• Repeat this procedure to assemble the other upper leg
to the other lower leg.
Elbow Foot
Lower Leg Long Portion
Lower Leg
Elbow Foot
Foot
SHOWN ACTUAL SIZE
#8 x 3 /
4
" Pointed Screw - 2
#8 x 1 /
2
" Pointed Screw - 2
Correct Incorrect
3
4
Red Dot
Lower Leg
Upper Leg
Straight
End
Button
Hole