Fisher-Price 79596 - Manual (Page 5)

Assembly
5
• While holding the elastic loops in place, turn the seat
face down.
• Hook the elastic loop on the left side onto the peg on the
right side.
• Hook the elastic loop on the right side onto the peg on the
left side.
• While pressing the button on the seat tube, slide the seat
tube arm onto the seat tube. Make sure the button on the
seat tube “snaps“ into the hole in the seat tube arm.
• Turn the seat upright.
• Fit the pad edges around the rim of the seat.
• Attach the two fasteners on each side of the pad to the
fasteners on each side of the seat.
11
Elastic Loop
Peg
Elastic Loop
Peg
Bottom View
Hint: The elastic loops should cross over each other when
attached correctly to the pegs.
Fasteners
9
10
Seat Tube
Button
Seat Tube
Arm Hole
• Insert an M4 x 31.5 mm bolt through the seat tube arm
and seat tube.
• Attach an M4 lock nut to the bolt. Make sure the rounded
side of the lock nut faces out.
• Using an adjustable wrench, hold the lock nut in place.
Then using a Phillips screwdriver, tighten the bolt. Do not
over-tighten.
12
M4 Lock Nut
Rounded
Side
M4 x 31.5 mm Bolt
Shown Actual Size