Fantom Vacuum FANTOM PT302H - Manual (Page 6)

AVAILABLE ACCESSORIES
Use only accessories recommended for this rotary tool.
Follow instructions that accompany accessories. Use
of improper accessories may cause injury to the
operator or damage to the
rotary tool.
Use only accessories designed for this rotary tool to
avoid severe injury or tool damage.
Do not use any accessory unless you have completely
read the instructions or Owner’s Manual for that
accessory.
LATERAL STYLE DRYWALL CUTTING BIT
This cutting bit has a fine spiral for removing high volumes
of material when cutting and leaving a smooth edge.
Use this cutter for cutting drywall.
GENERAL PURPOSE CUTTING BIT
This cutting bit has a coarse spiral for removing material
when being used for general cutting.
Use this general purpose cutter for cutting materials such
as wood, plastic and fiberglass.
UNPACKING AND CHECKING CARTON CONTENTS
If any part is missing or damaged, do not plug the
Rotary Tool into the power source until the missing or
damaged part is replaced and assembly is complete.
Carefully unpack the Rotary Tool and all its parts.
Compare against the “Rotary Tool Components” chart.
NOTE: See Page 7 for illustration of parts and chart.
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the
Rotary Tool.
ACCESSORIES
WARNING !
WARNING !
CARTON CONTENTS
WARNING !
WARNING !
6