Fisher-Price EF20B - Manual (Page 14)

2
Type
1
Features
Type
1
Features
2
Forward-Facing Installation
26
Locking Lap-Shoulder Belt Installation
Figure1illustratesatypicalforward-facing
installationusingthevehicle’slockinglap-
shoulderbelt.
IMPORTANT!When installing the restraint with
vehicle belts, store the lower hooks in storage
slots under cover (see page 16, Fig. 2).
1.. .With.the.restraint.in.the.upright.position,.place.
it.forward-facing.in.the.vehicle.seat..
 IMPORTANT!Installation can be improved by
using the tether (see pages 32–33).
2.. .Pull.to.fully.extend.the.vehicle.lap-shoulder.
belt..Hold.the.shoulder.and.lap.portion.of.the.
vehicle.belt.together.and.route.through.the.
forward-facing.belt.path.
3.....Verify.that.the.vehicle.belt.is.not.twisted,.then.
buckle. (Fig. 2)...Pull.on.the.vehicle.belt.to.
make.sure.it.is.securely.buckled.
4.. .Kneel.on.the.restraint.to.push.it.into.the.vehicle.
seat.while.removing.slack.from.the.vehicle.lap-
shoulder.belt.
(Fig. 3).
5.. .Verify.that.all.connections.are.secure.and.the.
restraint.is.stable...A.secure.restraint.should.
allow.no.more.than.1.inch.of.side-to-side.or.
forward.movement.at.the.belt.path.(see “Check
Buckle Position” on.page.30).
1
3
2
27
Forward-Facing Installation
1
Non-Locking ELR Lap-Shoulder Belt
Installation Using a Locking Clip
Figure1illustratesatypicalforward-facinginstallation
usingthevehicle’snon-lockinglap-shoulderbeltanda
lockingclip.
IMPORTANT!When installing the restraint with
vehicle belts, store the lower hooks in storage slots
under cover (see page 16, Fig. 2).
Do not install this restraint using
a non-locking ELR vehicle belt,
unless a locking clip is used.
warning
2
Always use in upright position in
forward-facing mode. See page 11.
warning
Always use in upright position in
forward-facing mode. See page 11.
warning
1.. .Remove.the.locking.clip.from.the.user.guide.storage.bag..With.the.restraint.in.the.upright.
position,.place.it.forward-facing.in.the.vehicle.seat..
 IMPORTANT!Installation can be improved by the using the tether (see pages 32–33.)
2.. .Pull.to.fully.extend.the.vehicle.lap-shoulder.belt..Hold.the.shoulder.and.lap.portion.of.the.
vehicle.belt.together.and.route.through.the.forward-facing.belt.path.
3.....Verify.that.the.vehicle.belt.is.not.twisted,.then.buckle. (Fig. 2)...Pull.on.the.vehicle.belt.to.
make.sure.it.is.securely.buckled.