Furuno CH-37 - Manual (Page 65)

6-1
MENU SETTINGS
6.1 System Setting Menu
1. Turn on the power while pressing the MENU key. Release
the key when you hear a beep. The SYSTEM menu ap-
pears.
** SYSTEM SETTING **
EXIT : PRESS MENU KEY
3D DISPLAY : OFF ON
SHIP’S POSITION : OFF L/L LOP
CURRENT DATA : OFF FLOW FROM FLOW TO
DEPTH DATA : OFF ON
HEADING INDICATION : OFF TRUE AZ
NORTH MARK : OFF ON
TRACK : 10R 20R
HDG/SPD DATA : NAV CI
NAV DATA : GPS LORAN C LORAN A
DR DECCA OTHERS
DATA FORMAT FOR NAV2 : NMEA CIF
CIF BAUD RATE : 1200 2400 4800
TVG CORRECTION : OFF 1/2 1
UNIT : m ft fa HIRO
V-MODE MANUAL TRAIN : HALF FULL
DEGAUSSING INTERVAL : 30 SEC
FACTORY SETTING : NO YES
Default settings circumscribed.
Figure 6-1 SYSTEM SETTING menu
2. Select SYSTEM SETTING and press the MENU key.
3. Select items with up and down arrow keys; options with left
and right arrow keys.
4. Press the MENU key to return to the system menu.
Note: Be sure to return to the system menu before turning
off the power, to properly register settings.
5. To return to normal operation, reset the power.
See the next page for SYSTEM SETTING menu description.