Fluke Computer Accessories - Manual (Page 50)

User’s Guide – version 3.5 NetFlow Tracker
50
invpn – specifies a VPN that the input interface must be part of.
<name> The VPN name; see Device Settings for more information
<id> The VPN identifier
outvpn – specifies a VPN that the output interface must be part of. Format as for
invpn above.
vpn – specifies a VPN that either interface must be part of. Format as for invpn
above.
srcaddr – specifies an acceptable source address.
<addr> The address in dotted-decimal format
<addr1>-<addr2> A range of addresses, with <addr1> being the start of the
range and <addr2> the end
srcaddr_exclude=true – specifies that the supplied source addresses are excluded
rather than included.
dstaddr – specifies an acceptable destination address. Format as for srcaddr above.
dstaddr_exclude=true – specifies that the supplied destination addresses are
excluded rather than included.
addr – specifies an acceptable source or destination address. Format as for srcaddr
above.
addr_exclude=true – specifies that the supplied source or destination addresses are
excluded rather than included.
proto – specifies an acceptable IP protocol.
<name> The protocol name, such as TCP or UDP
<number> The protocol number, in the range 0-255
proto_exclude=true – specifies that the supplied protocols are excluded rather than
included.
srcport – specifies an acceptable source application port number.
<port> The application port number in the range 0-65535
<port1>-<port2> A range of port numbers, with port1 being the start of the
range and port2 the end
srcport_exclude=true – specifies that the supplied source application port numbers
are excluded rather than included.