Fluke Computer Accessories - Manual (Page 52)

User’s Guide – version 3.5 NetFlow Tracker
52
applid_exclude=true – specifies that the supplied identified applications are
excluded rather than included.
tos – specifies an acceptable Type-of-Service value.
<prec> The precedence, in the range 0-7
<tos> A string of letters indicating which ToS bits must be set or
unset, each letter being one of D, T, R or M for low delay, high
throughput, high reliability and minimise monetary cost
respectively, or d, t, r or m for normal delay, normal
throughput, normal reliability and normal monetary cost; any
bits not specified as set or unset will be disregarded
<prec>%20<tos> The precedence and ToS as above; %20 being a URL-encoded
space character
tos_exclude=true – specifies that the supplied Type-of-Service values are excluded
rather than included.
ds – specifies an acceptable differentiated service codepoint.
<name> The assigned name of the codepoint
<code> The six-digit binary representation of the codepoint
<byte> The value of the entire Type-of-Service byte, in the range 0-255
ds_exclude=true – specifies that the supplied differentiated service codepoints are
excluded rather than included.
class – specifies an acceptable traffic class.
<name> The traffic class name; see Device Settings for more information
<id> The traffic class identifier
class_exclude=true – specifies that the supplied traffic classes are excluded rather
than included.
srcas – specifies an acceptable source autonomous system number.
<as> The AS number, in the range 0-65535
<as1>-<as2> A range of AS numbers, with as1 being the start of the range
and as2 the end.
srcas_exclude=true – specifies that the supplied source autonomous system
numbers are excluded rather than included.
dstas – specifies an acceptable destination autonomous system number. Format as
for srcas above.