Fagor America VFA-78 S - Manual (Page 13)

13
OPERATING
(9 Quick Heating)
Each control area includes an automatic programming function for quick heating.
This programming allows the corresponding maximum temperature to be reached
quickly and maintained automatically.
Touch sensor + once and it is in position 9, the corresponding decimal point to 9 will
switch itself on.
Touching sensor of the same zone will decrease to the required level (levels 3…6 are
recommended).
After having reached the automatic heating time a short signal could be heard and
the decimal point will switch itself off. The heat source carries on work in a
conventional manner.
To cancel the automatic programming touch the - sensor and the decimal point will
switch off.