Fisher-Price BOUNCE 'N PLAY ACTIVITY DOME 79546 - Manual (Page 4)

• Insert an M6 x 1 5 /
8
" screw through each frame tube and into
the frame.
• Fit an M6 lock nut (so that the protruding side is toward the
fabric) into each middle opening on the back of the frame.
Metal
Canopy
Stay
• Insert the metal canopy stay through the canopy tunnel.
• Open the base and position it upright on a flat surface,
as shown.
• Locate the end of the base with the mesh cover. Insert the
entire plastic mesh cover stay into one of the button holes
in the mesh cover.
• Be sure to tuck the plastic mesh cover stay away from the
button hole in the mesh cover.
Frame Tube Frame Tube
• Position the ends of the frame tubes against the middle holes
in a frame.
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.
M6 Lock Nut
Canopy Tunnel
Middle Hole Middle Hole
Frame
Frame
Frame Tube
Frame Tube
M6 x 1 5 /
8
" Screw - 4 M6 Lock Nut - 4
Base
Mesh Cover
Button Hole
Plastic Mesh
Cover Stay
Protruding
Side
4
ASSEMBLY
1
2
3
4