Fisher-Price BOUNCE 'N PLAY ACTIVITY DOME 79546 - Manual (Page 6)

®
• Fasten the pad fasteners to the base fasteners.
• Lift the canopy.
• Attach the toys to the canopy fasteners.
IMPORTANT! Assembly is now complete, but Bounce ‘n Play
Activity Dome is not ready for use. Please refer to the Use
instructions, on this page, beginning with step 2.
Pad
Fastener
Toys
Canopy
Fasteners
Sides of Base Wire
• Position the product upright on a flat surface.
• Grasp both sides of a base wire.
• Pull both sides of the base wire outward and then let the base
wire rotate down.
Note: If the base wire does not freely rotate down, pull the sides
of the base wire further outward.
To Unfold
ASSEMBLY
8
6
USE
1
Frame
Groove
Groove
• Lift the product up slightly so that each side of the base wire
“snaps” into the groove in each frame. Make sure you hear
a “snap”.
2
Sides of Base Wire