Ping-option, Syntax, History – Fortinet FortiMail 3.0 MR4 User Manual
Page 38: Related topics, History related topics
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
38
06-30004-0420-20080814
ping-option
execute
ping-option
U
se this command to configure the ping function behavior settings.
Syntax
execute ping-option <option>
History
Related topics
•
Option
Description
Default
data-size <bytes>
Enter datagram size in bytes.
56
df-bit {yes | no}
Enter yes to set the DF bit in the IP header to prevent the ICMP
packet from being fragmented. Setting df-bit to no allows the
ICMP packet to be fragmented.
no
pattern <hex_pattern>
Enter a pattern to fill the optional data buffer at the end of the
ICMP packet, for example 00ffaabb. The size of the buffer is
specified using the data_size parameter. This allows you to
send out packets of different sizes for testing the effect of
packet size on the connection.
None
repeat-count <integer>
Enter the number of times to repeat the ping. The value must be
greater than 0.
5
source {auto | <ipv4>}
Select the interface from which the ping is sent. Enter either
auto
or the interface IP address.
auto
timeout <seconds>
Enter the ping response timeout in seconds.
2
tos <tos_value>
Enter the IP type-of-service option value, one of:
• default
0
• lowcost
minimize cost
• lowdelay
minimize delay
• reliability
maximize reliability
• throughput
maximize throughput
default
ttl <TTL_integer>
Enter the time-to-live (TTL) value.
64
validate-reply {yes | no}
Enter yes to validate ping replies.
no
view-settings
View the current ping option settings.
N/A
FortiMail v3.0
New.