7 general information – First Virtual Communications PS1010-3A User Manual

Page 9

Advertising
background image

IBBI Electronics

9

PS1010 is in its current mode and the Amp indicator
is also ON. But rotating current controller knob does
not affect the display value.

• You are at the current mode and at this mode the

display shows only the actual current draw by
the DUT. But rotating the current controller knob
means changing the Max current limit. To see
the max current limit, C-SET button should be
pressed.

Cannot increase voltage from a certain value.

• Check whether CC indicator appears. If so,

increase the current limit.

7 General

information

Terminology

DUT- Device Under Test

Warranty terms and conditions:

Warranty will apply only for the circuit but not for any
other. Warranty will void if case was previously open or
attempted to repair. Under any physical damages,
damages caused by lightning or due to miss-use
conditions, the warranty will not be applicable. The
customer must fill the Warranty activation card and post
it to IBBI Electronics to receive within 14 days of
purchase or mail a scanned copy.
Customers are not encouraged to do any repair from out
side even if the warranty expires.

Advertising