FUJITSU fi-4120C - Manual (Page 156)

8.5 Double-feed Detection Conditions 129
8
ADF A
N
D
P
A
P
E
R SP
ECIFI
C
A
T
ION
8.5 Double-feed Detection
Conditions
There are three double-feed detection modes: document thickness,
document length, and both document thickness and length. The
following conditions must be satisfied in each of these detection
modes.
■ ■ ■ ■ Detection by Document Thickness
Sheets of the same thickness shall be set in the ADF at a time.
• Document thickness: 0.065 to 0.15mm
• Printed area: 12% or less
• No black printed areas are allowed at the center area
(26 x 10mm) at the leading edge of the document.
• Punched holes are not allowed within 35mm of the vertical
center line of the document.
• The deviation in the amount of the light transmitted through
background areas must not be less than 10%.