FUJITSU fi-4120C - Manual (Page 49)

22 2.2 Connecting the Scanner to a PC
■ ■ ■ ■ Connecting the SCSI Interface Cable
When using the scanner with SCSI interface, a third-party SCSI
interface cable and SCSI card must be present.
• SCSI interface cable
The physical specifications of connector is complied with
SCSI-2.The 50 Pin Contact Shielded High-Density SCSI
Device Connector is used.
• SCSI card
The recommended SCSI card is noted on the following home
page.
http://imagescanner.fujitsu.com/
ATTENTION
• When connecting the SCSI interface cable,
be sure to first connect the SCSI interface
cable then turn on the power of the scanner
and the personal computer.
• Connect the scanner so that it is the terminal
device on the SCSI daisy chain.
• The SCSI card and SCSI interface cable has
to be purchased separately.