Follett REF5-BB - Manual (Page 4)

Reversing the door swing – optional
NOTICE
When reinstalling latch and hinge screws, 242 blue Loctite* MUST be
applied to screws. Torque screws to 25 in-lbs.
1. Remove screws and latch from refrigerator cabinet (Fig. 2.1).
2. Use fl at screwdriver to carefully remove (do not scratch) hinge
covers (Fig. 3.1).
3. Support door and remove screws attaching hinge to refrigerator
cabinet (Fig. 3.2).
4. Cover hinge screw holes with screw hole plugs removed from
opposite side.
5. Reverse door. Apply 242 blue Loctite to hinge screws and reinstall
torqued to 25 in-lbs.
6. Reinstall latch on opposite side.
7. Remove screws and handle from door (Fig. 4.1).
8. Rotate handle (Fig. 4.2).
9. Apply 242 blue Loctite to latch screws and reinstall torqued to 25 in-lbs.
Note: See keypad lock manual for reversing a door that is equipped with a
keypad lock.
4
1
2
1
1
2
1
Fig. 2
Fig. 3
Fig. 4
* Loctite is a registered trademark of Henkel Corporation in the United States and other countries.