Major features, Save these instructions – Franklin Industries, L.L.C. FIM200 User Manual

Page 5

Advertising
background image

4

?

If the ice maker will not be used for a long time, before the next use it must be
thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of
sanitizing solution. Do not leave any solution inside the ice maker after cleaning.

?

DO NOT touch the condenser fins. The condenser fins are sharp and can be easily
damaged.

?

DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners
may transmit taste to the ice cubes, or damage or discolor the interior.

?

The ice machine cleaner contains acids. DO NOT use or mix with any other
solvent-based cleaner products. Use rubber gloves to protect hands. Carefully read the
material safety instructions on the container of the ice machine cleaner.

?

Do not use this apparatus for other than its intended purpose.

SAVE THESE INSTRUCTIONS

Electrical Connection

Do not, under any circumstances, cut or remove the third (ground) prong from the power
cord. For personal safety, this appliance must be properly grounded. The power cord of
this appliance is equipped with a 3-prong grounding plug that mates with a standard
3-prong grounding wall outlet to minimize the possibility of electric shock hazard from
the appliance. Have the wall outlet and circuit checked by a qualified electrician to make
sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered,
it is your responsibility and obligation to have it replaced with a properly grounded
3-prong wall outlet.

The ice maker should always be plugged into its own individual electrical outlet which
has a voltage rating that matches the rating label on the appliance. This provides the best
performance and also prevents overloading house wiring circuits which could cause a
fire hazard from overheated wires. Never unplug your ice maker by pulling on the power
cord. Always grip the plug firmly and pull straight out from the outlet. Repair or replace
immediately all power cords that have become frayed or otherwise damaged. Do not use
a cord that shows cracks or abrasion damage along its length or at either end. When
moving the ice maker, be careful not to damage the power cord.

Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended
that you do not use an extension cord with this ice maker.

Major Features

1. Completely automatic operation.
2. The different colors of the LED display indicate various work modes.
3. The fan motor responds to the ambient temperature. If room temperature is low, the

motor will stop working to keep the cooling system in good working condition.

4. Ice cube size is adjustable.
5. A sensitive probe and accurate timer enhance the performance of the ice maker.

Advertising