Getting started, Introduction, Contacting fluke – Fluke Ti20 User Manual
Page 9: Chapter 1
1-1
Chapter 1
Getting Started
Introduction
The Fluke Ti20 Imager (hereafter, “the Imager”) is a state-of-the-art, lightweight, pistol-
grip style thermal imaging unit. Using the Imager, you can obtain instant and accurate
thermal images and radiometric readings from distant targets. The Imager is
ergonomically designed for right-hand or left-hand use, and captures thermal images and
data with a simple trigger press. The Imager can store up to 50 images that can be
downloaded to your personal computer for storage, analysis, and report preparation.
The InsideIR companion software application, lets you display, examine, and analyze
your images and data to determine qualitative and quantitative trends associated with the
target equipment. You can also use InsideIR to define maintenance databases based on
your equipment conditions, monitoring, and asset management needs.
The Imager provides high performance thermal imaging and is designed for industrial
use. The Ti20:
•
Uses new detection technology to provide a clear thermal image with accurate
temperature measurements up to 350
°
C (662
°
F).
•
Is protected against dust and moisture (IP54 rated) for use in harsh industrial
environments.
•
Provides a minimum of 3 hours of continuous battery life.
Contacting Fluke
To contact Fluke, call:
1-888-993-5853 in USA
1-800-363-5853 in Canada
+31-402-675-200 in Europe
+81-3-3434-0181 in Japan
+65-738-5655 in Singapore
+1-425-446-5500 from anywhere in the world
Or, visit Fluke’
To register your product,