Fisher & Paykel E411T - Manual (Page 9)

7
Installation instructions (all models)
3. Ventilation and installation
■ ■
To ensure adequate ventilation for your refrigerator see recommended cabinetry
dimensions below.
■ ■
These measurements do not include space for the water filter, (only required on Ice & Water
cabinets), at the back of the cabinet as we recommend that the filter is placed as close to the
incoming water supply as possible.
■ ■
If integrating your refrigerator, follow installation instructions provided with integration kit.
Cabinetry dimensions (mm)
(including minimum air clearances) E402B
E411T
E440T
E442B
E521T
E522B RF540A
A inside height 1735 1735 1735 1810
Flush with refrigerator chassis – full door rotation
B inside width 675 720 830 940
C inside depth 620 620 620 620
Flush with refrigerator door – full door rotation
D inside width 705 750 860 1000
E inside depth flush to curved door 675 675 675 –
F inside depth flush to flat door 690 690 690 690
Flush with refrigerator door – 90° door rotation
(for full drawer/shelf access, the doors need to be open past 90°)
G inside width 745 790 900 1010
H inside depth flush to curved door 675 675 675 –
I inside depth flush to flat door 690 690 690 690
Minimum clearances
J side clearance 20 20 20 20
K side clearance – hinge side flush with door – full rotation 50 50 50 50
L side clearance – hinge side flush with door – 90° rotation 90 90 90 90
M rear clearance (incl. evaporator tray) 30 30 30 30
N vent (above refrigerator cabinet or around top of cupboard) 50 50 50 50
O door clearance – hinge side flush with chassis – full rotation 520 555 645 365
P door clearance – hinge side flush door – full rotation 490 525 615 335