Fisher-Price V7310 - Manual (Page 7)

7
First, fi t the tabs on the top of the boulder hopper onto the grooves in the track • A .
Next, fi t the hopper base into the slot in the ramp •
B
.
Then, push to • “snap” the boulder hopper in place.
Turn the assembly around so that the gas pump faces away from you. •
Fit the base of the boulder crane into the socket in the track, as shown. Push to • “snap” in place.
Fit the base of the elevator crane into the socket in the tower top. Push to • “snap” in place.
Hint: This may require some force.
pp p
7
8
9
Boulder Hopper
Boulder Crane
Elevator Crane
Assembly
B
A