Fisher-Price V7310 - Manual (Page 9)

9
Assembly
Fit the pegs on the end of the elevator crane into the grooves in the other elevator. Push to •
“snap” in place.
Hint: The elevator is designed to fit on the elevator crane one way. If it does not seem to fit, turn it
around and try again!
13
Pegs
Elevator
Before applying the labels, wipe the surface with a clean, dry cloth to remove any dust or oils. •
Place the labels exactly as shown in the illustration and avoid repositioning the labels. •
After applying a label, rub it fi rmly with a clean dry cloth, starting at the center, to remove any •
air bubbles.
6
5
2
3
4
1
1
7
1
1
14