Foundry Networks CK-300 - Manual (Page 17)

G e t s t a r t e d
17
To start the search, press and hold the Navi wheel for about 1 second.
During the search, the indicator light of the input device flashes. The car
kit first tries to connect to the device that was used with it most
recently. If this fails, the car kit tries to connect to one of the other
Bluetooth devices that have been most recently paired with it. The car
kit beeps when it connects to the device.
Connect the car kit automatically
You can set your paired device to allow an automatic connection with
the car kit when the car kit is switched on. To do this in Nokia devices,
change your paired device settings in the Bluetooth menu.
When you switch on the car kit, within 45 seconds the car kit tries to
make a Bluetooth connection to the last used device. If this fails, the car
kit tries to connect to one of the other Bluetooth devices that have been
most recently paired with it.
Disconnect the car kit
To disconnect the car kit from your device, close the connection with the
car kit in the Bluetooth menu of your device or switch off the car kit.
You do not need to delete the pairing with the car kit to disconnect it.
Clear the list of paired devices
The car kit saves the pairing information about the last eight Bluetooth
devices that have been paired with it. To clear this information, switch
off the car kit, and press and hold the Navi wheel for 10 seconds. The car
kit beeps.
■ Connect your music player to the car kit
You can connect a compatible music player to the car kit using
the 3.5-mm audio plug of the supplied connectivity cable.