Furuno FAX-410 - Manual (Page 17)

- 11 -
receiver, 2 is for external receiver. Pressing
the key after setting a key,
completes the setting.
２ .４.２ Setting of timer reception
This unit has 16 booking functions and each timer is set as follows.
Press key. Then the timer reception setting mode is set and the message is
shown on the right.The displayed number correspond to the following entries
respectively.
1 : Release
2 : Setting
3 : Re-calling (readout of the booking data)
4 : Entry booking
(1) Release
Press key. Then the message is
shown on the right. Pressing the key
releases the timer mode
(2) Setting
Press key. Then the message is
shown on the right.
Select booking number(s), 0~F,
by pressing
key.
The display shown on the right is an example
when selecting booking number “0”.
Then, press key to fix the selection
Plural selection of the booking numbers are
acceptable. The display shown on the right
is an example when select and fix the
booking number “0”, “1”, “2” and “3”.
Press the key to complete the setting.
(3) Re-calling (readout of the booking data)
Press key.
Select a booking number to be confirmed by
pressing key. Then, contents
of the booking data is displayed.
N
0～9
TIMER RCV : 1-OFF
2-ON 3-RCL 4-STR
TIMER RCV : OFF?
PUSH E KEY
SET REG No. 0-F
PUSH / ＆ &E KEY
TIMER RCV NO.: 4
0123
△ ▽
△ ▽
RECALL TIMER REG
SET REG NO. 0－ F
E
2
1
E
2
E
3