Furuno FAX-410 - Manual (Page 18)

- 12 -
(4) Entry booking
Press key.
Select a timer number for booking by pressing
key. Then, the unit will ask
whether the number is correct or not. Fix
the number by pressing the key or
enter a new number if the number is not
correct. The display on the right shows
when the number 1 is set.
Then, enter a channel number with three keys (or press two keys
and key for automatic setting of the maximum sensitive frequency) and fix
with the key or reset a channel with
the key.
Further, set a day of the week with
key and fix it with the key. Then, set
start and end time with keys from
00:00 to 23:59.
After setting is competed, fix it with the
key. To change the time while setting,
press the
key to reset the time.
After fix with the key, the setting is
displayed as shown on the right.
The message on the right is for setting:
Channel No.000 at JMH 3MHz, booking
No.1, starting Monday 08:00 and ending
09:00.
Be sure to give one minute or longer for time
interval between start times of booking.
For example, 12:00~12:30 for No.1 and
12:31~13:00 for No.2.
２ .４.３ Sleep timer setting
The sleep timer indicates the sleep mode after a specified time for reception has
passed and its setting is made as following.
Press key. Then the message is shown
on the right. The displayed numbers refer to
STORE TIMER REG
SET REG NO. 0－ F
R1 SET CHANNEL
NO. in 3 FIGURES
△ ▽
N
0～9
REV
・
E
R1 C000 SET DAY
of THE WEEK by△ ▽
R1 C000 MON
SET START／ STOP
08： 00 － 09： 00？
PUSH E KEY
000 JMH 3622.5
1MON 08:00－ 09:00
△ ▽
4
E
N
0～9
C
E
N
0～9
E
C
E
3