Operating tips, En-15 – Friedrich MR18C3F User Manual

Page 16

Advertising
background image

En-15

OPERATING TIPS

Dry Mode

About 14 °F to 115 °F

About 64 °F to 90 °F

Outdoor temperature

Indoor temperature

Cooling Mode

About 14 °F to 115 °F

About 64 °F to 90 °F

Temperature and Humidity Range

● If the air conditioner is used under higher temperature conditioner than those listed, the built-in protection circuit may

operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.

● Do not use this unit for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in ordinary

dwellings.

● If the unit is used for long periods under high-humidity conditions, condensation may form on the surface of the indoor

unit, and drip onto the floor or other objects underneath. (About 80% or more)

Tips for saving energy

● When the outdoor temperature is low (about 50 °F or less), the unit will consume the power of 20~40W unless the power

plug is disconnected from the outlet even if the air conditioner turns off.

● Remove the power plug to stop the power supply for energy saving when not using for a long time.

06B030_9315255044-01_En

2006.2.6, 1:47 PM

15

Advertising
This manual is related to the following products: