Furuno GP-1650F - Manual (Page 98)

A-2
NOISE LIMITER (OFF, NL1, NL2, NL3)
CLUTTER (AUTO, 0-9)
WHITE MARKER [0-16 (or 0-8), Default: 0]
HUE (1-9, Default: 1)
SIGNAL LEVEL [SL1, SL2, SL3, SL4, SL5, SL6 (or SL1, SL2, SL3), Default: OFF]
PICTURE ADVANCE (2/1, 1/1, 1/2, 1/4, 1/8, STOP)
E/S WINDOW (STD, WIDE)
1
SOUNDER SETUP OPTIONS
CONFIGURATION SETUP NMEA PORT 1
SETUP NMEA/DGPS PORT 2
FORMAT
(NMEA0183Ver.1.5, 2.0)
LAT/LON FORMAT
(DD
°
MM.MM’, DD
°
MM.MMM’, DD
°
MM.MMMM)
FORMAT
(NMEA0183Ver.1.5, 2.0, RTCM104EX, RTCM104INTRN,
RTCM104OUT)
LAT/LON FORMAT
(DD
°
MM.MM’, DD
°
MM.MMM', DD
°
MM.MMMM)
SELF TEST (MEMORY, I/O; KEYBOARD; TEST PATTERN)
DEMONSTRATION MODE
MEMORY/TRIP CLEAR
DOWNLOAD WAYPOINT/RTE TO PC
UPLOAD WAYPOINT/RTE FROM PC
SAVE DATA TO MEMORY CARD
LOAD DATA FROM MEMORY CARD
FISH ALM LVL (HIGH, NORMAL, LOW)
TX POWER (ON, OFF)
TVG 200 kHz (0-9, Default: 5)
TVG 50 kHz (0-9, Default: 5)
ECHO OFFSET 200 kHz (-20 - +20, Default: 0)
ECHO OFFSET 50 kHz (-20 - +20, Default: 0)
SEABED LVL 200 kHz (20-200, Default: 80)
SEABED LVL 50 kHz (20-200, Default: 80) Soft key SYSTEM SETUP
Soft key RANGE SETUP RANGE1 (Default: 15 ft)
RANGE2 (Default: 30 ft)
RANGE3 (Default: 60 ft)
RANGE4 (Default: 120 ft)
RANGE5 (Default: 200 ft)
RANGE6 (Default: 400 ft)
RANGE7 (Default: 1000 ft)
RANGE8 (Default: 2500 ft)
ZOOM RANGE (7-2500 ft, Default: 30 ft)
B/L RANGE (10, 20 ft)
Setting range: 7-2500 ft
SELECT SNTNC. soft key (AAM, APB, BOD, BWC/BWR, DBT/DPT, GGA,
GLL, MTW, RMA, RMB, RMC, VTG, WPL, XTE,
ZDA)
UPLOAD/DOWNLOAD DATA
SYSTEM MENU
: When 8 is selected in HUE window
CLEAR PLOTTER MEMORY (NO, YES)
CLEAR GPS MEMORY (NO, YES)
CLEAR ALL MEMORY (NO, YES)
TRIP METER RESET (NO, YES)