Fisher 1266-X - Manual (Page 7)

5
1. DISC 1: DISCRIMINATE 1 is the search mode.
The 1266-X automatically operates in DISC 1
unless the TRIGGER-SWITCH is pushed and held or
pulled and held. DISC 1 is a full range
discrimination mode. All types of metal are
detected at the zero level and most small pieces
of trash are rejected at the maximum level of ten.
2. DISC 2: DISCRIMINATE 2 is similar to DISC 1
except that it operates only when the TRIGGER
SWITCH is pushed and held. DISC 2 is used for
target identification and/or pinpointing.
3. STEREO HEADPHONE JACK: Accepts most
stereo and mono headphones with one-quarter
inch diameter plugs. When used, the speaker is
automatically disconnected. A headphone can
be very helpful when hunting in noisy areas or
detecting faint signals.
4. SENSITIVITY: This is a dual range, push-pull knob
that controls sensitivity to targets and soil
minerals. Pull and rotate clockwise for normal
operation in mineralized soil. Push and rotate
clockwise for even more sensitivity in
non-mineralized, non-conductive soil. It should
be noted that faint erratic circuit noise is audible
at the full clockwise position.
5. BATTERY CHECK: Fully charged batteries will
give a loud tone when this button is pushed.
Weak batteries will give a weak signal and dead
CONTROL HOUSING
1
2
3
4
5
6