Fisher FVH-E420 - Manual (Page 13)

AUDIO/VIDEO CONNECTIONS
The VIDEO and AUDIO outputs of your VCR can be
connected separately to the input jacks of a TV monitor
and an audio system. This will provide the best possible
picture and sound quality, because the video/audio
signals from your VCR will not have to be processed by
the television tuner.
NOTES:
œ Even when audio/video connections are made, always
make the antenna connection between the VHF/UHF
OUT (VCR) and the VHF/UHF IN (TV) using the
supplied 75-ohm coaxial cable.
œ If a direct audio/video connection is made between the
VCR and the TV, set the source selector on the
television to A/V input.
VIDEO
VHF/UHF
FROM ANT.
TO TV
OUT
IN
OUT
AUDIO
AUDIO
OUTPUT
WHITE
VIDEO
OUTPUT
YELLOW VIDEO
INPUT
YELLOW
AUDIO
INPUT
WHITE
VCR
(Back panel)
VIDEO AUDIO
IN
VHF/UHF
ANTENNA
IN
COLOR TV/MONITOR
(Back panel)
2-wire monitor cable
(not supplied)
IN
75 ohm coaxial
cable (supplied)
SC4/UF (FVH-E420 GB) Wed. Jan. 26/2000
12